The main material of the acrylic swimming pool is acrylic. This article focuses on the highly integrated children's pool at Acrylic for family and children's pools. The product is highly integrated and does not require a separate machine room or platform for drainage. It is made of 15mm acrylic imported from Germany. (Simple children's acrylic plate swimming pool is made by heating, softening and pumping acrylic sheets, only a few millimeters thick in the corners, and then used. Resin reinforced, due to resin aging, acrylic panels are prone to cracking, resulting in water leakage. The swimming pool solves a series of problems such as low integration of the combined children's swimming pool, the need for separate heating equipment, water quality not meeting requirements, water leakage, drainage required platform, increased floor load, and high risk.

1. Install the acrylic baby swimming pool, you must use glass glue. If you accidentally stick the glass glue on the baby swimming pool, don't wipe it with a cloth, otherwise it will be more difficult to remove, and you can't wipe it with hard objects, which will lead to acrylic surface wounds. After the glass glue is dry, it should be taken off directly.

2, after the acrylic baby swimming pool is glued to the glass glue, the water cannot be tested within 24 hours, otherwise it will lead to water leakage.

3, should follow the principle of first put cold water after releasing hot water, can not be used in the environment above 80 degrees Celsius, if this temperature is exceeded, it will cause deformation of the acrylic baby swimming pool.

4. When cleaning in the acrylic baby swimming pool, do not wipe the acrylic surface with hard objects or abrasive cloth, otherwise it will cause minor burns.

5, can not be exposed to volatile products, such as paint, thinner, etc., otherwise the surface is easy to soften, or dissolved, leading to cracks and other phenomena.

6, can not be wiped with decontamination powder, decontamination powder has a certain role of corrosion acrylic, this will reduce the acrylic gloss effect.

7. The hardness of acrylic is equivalent to aluminum. If it is hard, it will be polished with a fine polishing paper and treated by car paint.

8. It is forbidden to use disinfectant, because the disinfectant has certain corrosiveness, long-term use will reduce the gloss effect of acrylic, avoid using disinfectant and use disposable swimming bag.