Jiangsu Shanhu Acrylic Technology Co., Ltd.

15317701002

shanhuykl@163.com

company's product

Company name: Jiangsu Shanhu Acrylic Technology Co., Ltd.
Contact: Manager Zhou
Contact number: 18021802662

Contact number: 15317701002

QQ: 2845551278 Email: shanhuykl@163.com
Address: No. 18, Huaihai South Road, Yilin Town, Yancheng City, Jiangsu Province

Glass chair
Glass chair
Glass chair

Acrylic manufacturers remind you that when cleaning and maintaining acrylic products, do not use coarse cloth or old clothes that are no longer worn as rags. The display cabinet should be wiped with a water-absorbent fabric such as a towel, cotton cloth, cotton fabric or flannel cloth. Old cloths with coarse cloth, wired heads, or stitches, buttons, etc., which will cause scratches on the exterior of cosmetic acrylic display cabinets, should be prevented as much as possible. To maintain the original brightness of the acrylic surface, be sure to determine if the rag is clean. After cleaning or wiping off dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt repeatedly rub the surface of the product, but will damage the bright surface of the display.

The light transmittance is over 92%, and the acrylic board colored with dye has a good color development effect. In addition, the acrylic sheet has excellent weather resistance, high surface hardness and surface gloss, and good high temperature resistance. . Acrylic sheets have good processing properties and can be divided into casting type and extrusion type according to the production process. Both thermoforming (including molding, blow molding, and vacuum blistering) can be used, as well as mechanical processing such as drilling, turning, washing, cutting, and the like. Micro-computer controlled mechanical cutting and engraving not only greatly improve the processing accuracy, but also create more beautiful patterns and shapes than the traditional way. In addition, the acrylic sheet can be laser-cut and laser-engraved to produce strange products.

Do not use a dry rag to wipe the dust from the exterior of the cabinet. The dust is made up of fiber, sand and bauxite. Many people are used to dry the surface of acrylic products with a dry rag. In fact, these fine particles have damaged the surface of acrylic in the conflict of back and forth wiping. Although these scratches are very small, even the naked eye can not see, but overnight, it will lead to the appearance of the cabinet is dull and rough, the light is no longer.