There are four more points that need our attention after the processing and completion of acrylic products :

First, the thermal deformation of ordinary acrylic sheets is stable at about 100 degrees, so pay attention to this temperature when using acrylic products. For example, the temperature should not be higher than 90 degrees when used continuously.

Second, the hardness of the surface of acrylic products is equivalent to aluminum, so care should be taken to avoid scratching the surface during use or acrylic processing. If scratched, the original shiny surface can be restored by polishing.

Special reminder: When cleaning and maintaining acrylic products, do not use coarse cloth or old clothes that are no longer worn as a rag. The display cabinet should be wiped with a water-absorbent fabric such as a towel, cotton cloth, cotton fabric or flannel cloth. Old cloths with coarse cloth, wired heads, or stitches, buttons, etc., which will cause scratches on the exterior of cosmetic acrylic display cabinets, should be prevented as much as possible. To maintain the original brightness of the acrylic surface, be sure to determine if the rag is clean. After cleaning or wiping off dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt repeatedly rub the surface of the product, but will damage the bright surface of the display.

Do not use a dry rag to wipe the dust from the exterior of the cabinet. The dust is made up of fiber, sand and bauxite. Many people are used to dry the surface of acrylic products with a dry rag. In fact, these fine particles have damaged the surface of acrylic in the conflict of back and forth wiping. Although these scratches are very small, even the naked eye can not see, but overnight, it will lead to the appearance of the cabinet is dull and rough, the light is no longer.