Acrylic product processing

The light transmittance is over 92%, and the acrylic board colored with dye has a good color development effect. In addition, the acrylic sheet has excellent weather resistance, high surface hardness and surface gloss, and good high temperature resistance. . Acrylic sheets have good processing properties and can be divided into casting type and extrusion type according to the production process. Both thermoforming (including molding, blow molding, and vacuum blistering) can be used, as well as mechanical processing such as drilling, turning, washing, cutting, and the like. Micro-computer controlled mechanical cutting and engraving not only greatly improve the processing accuracy, but also create more beautiful patterns and shapes than the traditional way. In addition, the acrylic sheet can be laser-cut and laser-engraved to produce strange products.

Hardness is one of the parameters that can reflect the production process and technology of pouring acrylic sheet, and is an important part of quality control. The hardness can reflect the purity of the raw material MMA, the weather resistance of the sheet, and the high temperature resistance. The hardness directly affects whether the sheet will shrink and bend, and whether the surface will be cracked during processing. Hardness is one of the hard and good indicators for judging the quality of acrylic sheets. The cast acrylic sheet has a current high hardness index with an average Dyro hardness value of 90 degrees.

When cleaning and maintaining acrylic products, do not use coarse cloth or old clothes that are no longer worn as a rag. The display cabinet should be wiped with a water-absorbent fabric such as a towel, cotton cloth, cotton fabric or flannel cloth. Old cloths with coarse cloth, wired heads, or stitches, buttons, etc., which will cause scratches on the exterior of cosmetic acrylic display cabinets, should be prevented as much as possible. To maintain the original brightness of the acrylic surface, be sure to determine if the rag is clean. After cleaning or wiping off dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt repeatedly rub the surface of the product, but will damage the bright surface of the display.